The ID2600-XDS was developed specifically for use with liquid fuels, featuring corrosion resistant internals, and long term compatibility with ethanol and methanol.
The ID2600-XDS has the highest flow rate of any injector offered by Bosch, and flows 50% more than the ID1700x.
The ID2600-XDS benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths.
- Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
- Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.
- Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
- Electrical Connector – USCAR
"Injector Dynamics ID1050-XDS Gen 2 Hayabusa with HTP rail conversion ONLY. 34mm length, 14mm top o-ring, remove lower o-ring retainer and use 2x8mm o-ring at TB seal (machine down lip under o-ring retainer). Uses GTR aluminum spacer on top of injector with a flat machined on one side. Requires throttle body bore to be drilled to 23/64"."